Different Types of Decorative Moldings


An ornamental molding can be defined as any kind of continual projection that is utilized to enhance the look of a wall. In ancient Greece, they were first made use of to throw water away from the wall. The contours, dimensions, and also projections of moldings differ considerably.


One type of molding – the frieze (or frieze board) – was initially used on the Parthenon at the Acropolis. The frieze is taken into consideration a part of the Greek building design.


The Parthenon was built for the goddess Athena. The frieze moldings that were utilized were meant to tell the tale of her accomplishment over Poseidon in coming to be the patron of the old city which is now Athens.


The frieze panels are a collection of designed pediments which are loaded with the images of Athena’s birth and rise to power. Today, a frieze board is the flat panel simply listed below a crown molding or cornice. Usually, reduced alleviation is applied to this panel for included design.


Today, frieze moldings are most typical as a section of a decorative molding that complies with the neoclassical style or embellishing design.


You require a rather high ceiling (minimum of 9 feet), and also it’s a great suggestion to repaint or discolor the frieze and the crown molding the same shade. The frieze is a good way to visually bring the ceiling down as well as make the space appear cozier.


Crown Molding

Crown molding is one of the most prominent type of cornice molding. Crown molding is normally a single-piece of ornamental molding, set up at the top of a wall surface, at an angle to the adjoining ceiling. However, I have actually seen crown molding assemblies of 5 or more pieces in even more intricate settings.


Crown molding usually has a profile that forecasts out on the ceiling and down the wall, adding an abundant look to a space. It is commonly utilized on top of cupboards or integrated furnishings.


Presenting this sort of ornamental molding to a relatively simple room offers a historical personality that the area would not otherwise have. Crown molding is also used in combination with various other moldings to add information to fire place mantels as well as shelves. (Wherefore it’s worth, this is possibly my favored building attribute).


Crown molding is a type of Cornice Molding The term “cornice” describes molding set up along the top of a wall or above the window. When this treatment is made from several items of molding, it is called a “build-up cornice.” The other form of cornice molding is the Cove Molding


Cove Molding


Cove molding is really comparable to crown molding, with the same application as well as function. The distinction in between the two remains in the profile. Cove molding has a concave account (which bows internal) while crown molding has a convex (outward) profile.


While crown is most in your home in traditional settings, Cove moldings are equally comfy in nation, or even modern settings. You don’t normally see multi-piece settings up of cove mold remediation st petersburg. You can occasionally see it “beaded” at top as well as bottom for a little accent.


Entrances, formal living-room, formal dining-room, and bedroom normally get attractive moldings with ornate or standard patterns.


Kitchen areas and also various other extra useful areas of the residence may be where you will certainly find the less complex design of the cove molding. For many years, coves and also crowns have actually become a lot smaller, but the majority of still bear the shapes as well as designs of the original Greek as well as Roman designers.


Chair Rail Molding


A chair rail is an attractive molding that divides a wall flat, generally concerning 32″ to 36″ above the floor. They shield the wall surfaces in locations where damages could take place from individuals standing up out of chairs.


For this reason, the much more typical chair rails will have a nosing in the center, with curved and diagonal surface areas that taper back to the wall surface above as well as below the nosing.


Today, chair rails stay an usual information in traditional insides. They offer the designing result of unifying the different architectural details of an area, such as door and window trim, and also fireplace borders.


Chair rail can likewise be made use of as a cap for wainscoting or other wood paneling. This decorative molding includes a sensation of detail and beauty while achieving continuity in an area by unifying the different attractive aspects.


Panel Molding.

Panel molding, frequently called a photo framework molding, looks like a large empty structure, as well as is often component of designs on walls of old Colonial as well as, Georgian, and Very early American residences. The positioning of this molding must be above the chair rail elevation and about 10 to 12 inches below the ceiling.


The dimension of this kind of attractive molding, measuring 1″ to 3″ in size, need to be in proportion to the ceiling height of the area. Like the various other moldings, panel molding includes a sensation of appeal as well as fragile detail to an area.


Wall surface framework appears at the Georgian period of American design, when plaster began to change wood panels on the walls. Panel molding also is an excellent way to separate walls into large, visually pleasing units, without the exact same expenditure of complete wall paneling.


An additional application of this flexible molding is to trim openings made by broader planks which are assembled as rails and styles. Typically, the centers of these frameworks are left open. By using panel moldings around the border of the opening, you produce the appearance of an image frame.


When this decorative molding is repainted in the exact same color as the surrounding wall surfaces, you accomplish a sculptural quality to a wall, including appearance and darkness. If moldings are painted in contrasting shades, they can develop a striking 3 dimensional appearance, providing depth and also dimension. This type of treatment is preferred for staircases and entries.


Baseboard & Base Molding.


Baseboard molding secures the bottom of the wall from ware and also tear, while concealing openings as well as various other irregularities where the wall surface fulfills the floor. Base moldings provide the flooring line a higher profile, as well as can be as intricate or straightforward as you like.


Whereas it is reasonably simple to install chair rail on a degree plane, baseboard (like crown) can be complicated if your floors (or ceilings) are not level. Consequently, I advise obtaining a specialist woodworker for the setup of these moldings.


As one solution to irregular floorings, you can set up a “footwear molding” along the lower front edge to provide the wall an ended up look. Something else you can do with wall (in addition to with the toe kick of your kitchen area cabinets) is integrate accent illumination.


This isn’t in keeping with the pure reactionary, but it’s a pretty awesome way to have accent lights around the border of an area. You could not do this up until they developed the little LED rope lights these days.


Rope lights been available in different lengths as well as shades, as well as can be conveniently installed behind wall. Merely make a notch in the back side of the baseboard, on top, and run the rope lights into the notch.


This is more often made use of in business areas, but has actually been added in entrances and also corridors – especially in contemporary homes.


Versatile Moldings

If you have a curved wall or arc, you can probably have an excellent craftsman create a rounded molding for regarding 3 times the expense of a straight molding. Or, you can get a versatile molding for regarding the very same rate as the straight one.


These allow you to install moldings onto curved surfaces or arches, without the delay as well as expense of having them made from timber. The stock accounts (there are hundreds) correspond the inflexible versions and they work regarding paint finish is concerned.