Vinyl Siding Repair – How To Install Vinyl Siding Replacement Panel

Image result for sliding repair

Thing we need to understand is what siding product we will need for our repair work. So get out some paper and make your list. In many cases you might just require the siding panels themselves.

Now that we have our list we require to narrow down the following:
What kind of siding do we require for our repair work?
Who is the manufacture that created the item?
What color siding do we need?
Now once we have done the research study and discovered all the above answers, we can now safely get all our siding material for our repair.

In this case, we will move on and start our repair. Now please understand that the more complicated your repair work is the more info will be required. This article will out line the fundamentals of changing new panels for our siding repair.

You can go to the author area below, and follow on with other short articles that go into more information on the above, to much better aid limit how to discover the right material for your repair.

Vinyl siding is very flexible and when the time comes that you require to fix siding, some easy tips can help you to do it yourself.

Now we will require a few siding hand tools to complete our repair. Below is the list of tools required:

Now cut the brand-new siding to your measurement and begin at the bottom and set up the new piece of vinyl siding.

Now lets eliminate our old vinyl siding, we can do this by beginning above our siding that we are replacing. Yes with vinyl siding repairs we should begin with the top down. So go to the siding panel that is above the ones you are going to change.

Lever – Pencil
Siding Snips
Measuring tape
Vinyl Siding Zip Tool
Now all of these tools are readily available at any big box store or hardware. The last tool noted is a need to have, let me state that again, when doing a vinyl siding repair work you will have to utilize the zip tool to unlock and re lock the vinyl siding. With out this tool your repair work can be a hassle.

When pulling the nails please put them in your pouch, pocket,t vinyl siding installation., coffee can, we do not desire them on the ground we are going to utilize them to re hang our brand-new panels.

Keep in mind to leave 1/ 4 spacing on each side of the panel for expand and contractions.

congratulations you have actually just fixed your siding and completed your vinyl siding repair.

We require to utilize our siding zip tool to unlock the 2 pieces. This is a bit challenging so I have consisted of a video listed below for you. Once you have the first panel un zipped, we then can utilize our hammer or pry bar and pull nails from the panel.

Use the zip tool and lock the panels together.

Ensure that the panels lock together by pulling up on the panel. When locked properly, siding will move side to side with ease. Now we require to nail our siding every 14 – 16 inches re using the nails we took down.

Never nail tight, constantly nail the siding in the middle of the nailing slots.
Stay away from each end of the siding a minimum of 2 inches.
Repeat the process till you have nailed off the last piece of siding and are ready to re lock the 2 panels together.

When you have all the panels eliminated. Use your measuring tape and determine the wall where the brand-new siding repair work is being done.